• AcePro-CE79-1
  • AcerPro HDMI 2.0 4K HDR 1x4 Splitter HDBaseT Extender with Auto-scaling

■ Extends Full HD 1080p HDMI signals up to 198ft (60m) and [email protected] signals up to 114ft (35m) over CAT5e/6 cable
■ Supports [email protected] YUV 4:4:4 8-bit, [email protected] HDR YUV 4:2:0 10-bit
■ Supports PoC (Power over Cable) technology which allows the transmitter and receiver unit(s) to be powered by only one power supply connected to the transmitter unit
■ Transmitter unit supports two HDMI loop-outs for addition local display connections
■ Receiver unit supports 2 HDMI outputs for more display connections
Note: Additional Receiver (part# CE-H24P11-S1) sold separately.
■ Supports EDID management for increased device compatibility
■ Supports resolution auto-down scaling from 4K to 1080p allowing displays of different capabilities to be connected simultaneously
■ Pure unaltered uncompressed 7.1ch digital HDMI over CAT5e/6 cable transmission offers the best audio signal
■ DTS-HD Master Audio and Dolby TrueHD high bit rate audio for true sound compatibility
■ Supports full bi-directional IR pass-through signal from 30KHz to 56KHz frequency
*Notes:
Below are limitations associated with 4K content down scaling:
- Down scaling to 720p and 480p is not supported
- YUV 4:2:2 down scaling is not supported
- Frame rate conversion (e.g., 60Hz to 24Hz) is not supported
- [email protected] monitors will display in [email protected] when the source content is [email protected]
- The Distribution Amplifier can bypass 4K HDR data content but cannot process it to make 4K HDR content fit 1080p proportionally

  • $0 $0

Highlights

Extends Full HD 1080p HDMI signals up to 198ft (60m)
and [email protected] signals up to 114ft (35m) over CAT5e/6 cable

Supports [email protected] YUV 4:4:4 8-bit, [email protected] HDR YUV 4:2:0 10-bit

Supports PoC (Power over Cable) technology
which allows the transmitter and receiver unit(s) to be powered by only one power supply connected to the transmitter unit

Transmitter unit supports two HDMI loop-outs
for addition local display connections

Receiver unit supports 2 HDMI outputs
for more display connections
Note: Additional Receiver (part# CE-H24P11-S1) sold separately.

Supports EDID management
for increased device compatibility

Supports resolution auto-down scaling from 4K to 1080p
allowing displays of different capabilities to be connected simultaneously

Pure unaltered uncompressed 7.1ch digital
HDMI over CAT5e/6 cable transmission offers the best audio signal

DTS-HD Master Audio and Dolby TrueHD
high bit rate audio for true sound compatibility

Supports full bi-directional IR pass-through signal
from 30KHz to 56KHz frequency

*Notes:
Below are limitations associated with 4K content down scaling:
- Down scaling to 720p and 480p is not supported
- YUV 4:2:2 down scaling is not supported
- Frame rate conversion (e.g., 60Hz to 24Hz) is not supported
- [email protected] monitors will display in [email protected] when the source content is [email protected]
- The Distribution Amplifier can bypass 4K HDR data content but cannot process it to make 4K HDR content fit 1080p proportionally

Specification

HDMI compliance:HDMI 2.0a

 

Video bandwidth:Single-link 600MHz (18Gbps)

 

Video support:HDR [email protected] (4:2:0 10-bit) / [email protected] (4:4:4 8-bit)

 

Resolution up to 4K ([email protected])

 

HDCP compliance:HDCP by pass

 

Auto equalization

 

Bi-directional IR pass-through

 

RS-232 Pass-through:Up to 115,200bps

Product:
■ Transmitting unit (TX):
-Dimensions: 12.8" (L) x 0.98" (H) x 5.83" (W)
-Weight: 3.06 lbs
-Connectors:
--1x 19-pin HDMI, Type A, Female, Input
--1x 3.5mm jack, IR, Input/ 1x 3.5mm jack, IR, Output
--1x Power jack
--4x 8-pin, RJ45, HDMI signal, Output
--2x 19-pin HDMI, Type A, Female, Loop-out
--1x Dip Switch, EDID management
--1x RS-232, Input/Output
--Micro-USB, Firmware update
■ Receiving unit (RX):
-Dimensions: 5.47" (L) x 0.75" (H) x 2.76" (W)
-Weight: 0.39 lbs
-Connectors:
--1x 8-pin, RJ45, HDMI signal, Input
--1x 3.5mm jack, IR, Input/ 1x 3.5mm jack, IR, Output
--1x RS-232, Input/Output
--1x 3-Pin dip Switch, EDID management
--2x 19-pin HDMI, Type A, Female, Output

 

Housing material:Metal

 

ESD protection:Human body model - ±15kV (air) & ±8kV (contact)

Supported Cable Length (CAT5):
■ [email protected]: 198ft (60m)
■ [email protected]: 114ft (35m)

 

Power adapter:
■ Input: 100-240VAC, 50/60 Hz
■ Output: DC 12V/7.5A
■ UL:E163743 Class:VI

 

Environmental conditions:
■ Operating temperature: 32 to 104° F (0 to 40° C)
■ Storage temperature: -4 to 140° F (-20 to 60° C)
■ Relative humidity: 20 to 90% RH (non condensing)

 

Certifications/Standards:FCC, CE, RoHS

 

TAA compliant

 

Warranty:1 years limited

 

Country of origin:Taiwan

 

*Notes:
Below are limitations associated with 4K content down scaling:
Down scaling to 720p and 480p is not supported
YUV 4:2:2 down scaling is not supported
Frame rate conversion (e.g., 60Hz to 24Hz) is not supported
[email protected] monitors will display in [email protected] when the source content is [email protected]
The Distribution Amplifier can bypass 4K HDR data content but cannot process it to make 4K HDR content fit 1080p proportionally

 

Requirements
■ HDMI source device such as computers, game consoles, Blu-ray/DVDplayers, and media players
■ HDMI displays, monitors, and HD TVs

 

Package Contents
■ HDMI 2.0 4K HDR 1x4 Splitter HDBaseT Extender (1 Transmitter, 3 Receivers)
-Additional Receiver unit (part# CE-H24P11-S1) sold separately
■ Power adapter DC 12V / 7.5A
■ IR Blaster cable (1pc)
■ IR Receiver cable (3pcs)
■ Terminal block (4pcs)
■ Mounting kit (Screw kit: 4x20 mm 6pcs, Mounting ears 4pcs, Screw kit: 3x4 mm 8pcs)
■ Rubber pad (4pcs)
■ User Manual

Download

FAQ

SUBSCRIBE TO OUR EXCLUSIVE OFFERS