- AVLAB-JJ04-1
- AVLAB Quad Port Serial PCIe Card with fan-out cable, DB9 RS-232, 921Kbps, Dual Profile Bracket
■ PCI Express 1-lane (x1) adapter works with PCI Express slots with different lane width ■ Installs in any available PCI Express slot ■ Four high-speed 16550 UART RS-232 serial ports (9-pin) support asynchronous baud rates up to 921Kbps ■ Works as standard RS-232 port or with 5V or 12V power output for devices that require power (such as handheld scanners, table scanners, POS displays, etc.). Configurable via jumpers with silk-screened settings on PCB ■ Built-in 256-byte FIFO buffers dramatically increase data transmit/receive speed, especially under Windows multitasking environment ■ Spare enhanced low profile bracket is included to work in low profile chassis ■ Onboard power connector to provide reliable power source for devices that require power ■ 4-layer PCB board: separate layers for data and grounding. Greatly reduces signal noise and loss. Delivers more reliable high-speed data transfers
Eigenschaften
PCI EXPRESS
PCI Express 1-lane (x1) adapter works with PCI Express slots with different lane width
HIGH SPEED DATA
Four high-speed 16550 UART RS-232 serial ports (9-pin) support asynchronous baud rates up to 921Kbps
WORKS WITH A STANDARD RS-232 PORT OR WITH A 5V/12V POWER OUTPUT
Works as standard RS-232 port or with 5V or 12V power output for devices that require power (such as handheld scanners, table scanners, POS displays, etc.). Configurable via jumpers with silk-screened settings on PCB
EXPANSION
Designed to add two 9-pin RS-232 serial ports to PCIe enabled desktop computers
256-BYTE FIFO BUFFERS
Built-in 256-byte FIFO buffers dramatically increase data transmit/receive speed, especially under Windows multitasking environment
GREATLY REDUCES SIGNAL NOISE AND LOSS
4-layer PCB board: separate layers for data and grounding. Greatly reduces signal noise and loss. Delivers more reliable high-speed data transfers
ON BOARD POWER CONNECTOR
On board power connector to provide reliable power source for devices that require power from the serial port
FULL HEIGHT AND LOW PROFILE SUPPORT
Installs in full height and low profile chassis with included brackets
Spezifikation
Chipset: MCS9904CV-AA
Bus connector: PCI Express x1
Version: PCI Express 1.1
Baud rate: Up to 921Kbps
FIFO: 256 Bytes
UART: 16C550
Connector: 4 x 9-pin RS-232, Male (via 4-port fan out cable)
Serial port power output:
■ 5V / 0.5A (per serial port) with or without 4-pin power connector connected
■ 12V / 0.5A (total output - all serial ports share) without connecting to 4-pin power connector
■ 12V / 0.5A (per serial port) with 4-pin power connector connected
Product:
■ Dimensions (with full height bracket): 3.62" (L) x 4.72" (W) x 0.79" (D)
■ Weight: 0.11 lbs
■ Color: Green
Environmental conditions:
■ Operating temperature: 32 to 122 degrees F (0 to 50 degrees C)
■ Operating humidity: 20% to 80% RH
■ Storage temperature: -4 to 140 degrees F (-20 to 60 degrees C)
■ Storage humidity: 10% to 90% RH
Certifications/Standards: FCC, CE, RoHS
Warranty: Lifetime limited
Country of origin: China
Herunterladen
FAQ
- How do I confirm that Windows detects my expansion card?
- To confirm that Windows detects your expansion card, complete the following: Press the Windows key+R, type devmgmt.msc, and press Enter. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it. For example, a RS-422/485 controller card would be under Ports (COM & LPT)
- How do I confirm that Windows detects my USB device?
- To confirm that Windows detects your USB device, complete the following: Press the Windows key+R, type devmgmt.msc, and press Enter. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it. For example, a USB device would be under Universal Serial Bus controllers.
- How can I make sure my serial port is working in Windows?
- To check whether or not an RS-232 serial port is working, perform an RS-232 loopback test by doing the following: If your serial port is not female, convert it by taking a female/female cable or gender changer and plugging it into the serial port. Take a metal paperclip or wire and cross pins 2 and 3. If you look closely at the female end, the pins should be numbered. Open a telnet session on the COM port number of the device that you are testing. Note: To open a telnet session on the COM port, you need a telnet client like PuTTY or Hyper Terminal. Windows XP comes with Hyper Terminal. When the session is open, anything you type into it you should see. The loopback test fails when you cannot see what you are typing. If the loopback test fails, make sure that the serial cable or gender changer that you are using works and that the adapter is in the correct port.