- AVLAB-JJ07-1
- AVLAB 2-Port Serial PCI Card, DB9 RS-232, 115.2Kbps
■ Adds 2 (9-pin) RS-232 serial ports to your PCI enabled system ■ Can be installed in 32-/64-bit, 3.3V/5V PCI and PCI-X slots ■ Works with modems, PDAs, and high-speed serial devices ■ Full support for DOS and Windows based software
Eigenschaften
EXPANSION
Adds 2 (9-pin) RS-232 serial ports to your PCI enabled system
SUPPORTS PCI-PCI-X SLOTS
Can be installed in 32-/64-bit, 3.3V/5V PCI and PCI-X slots
MODEMS, PDA AND HIGH-SPEED SERIAL DEVICES
Works with modems, PDAs, and high-speed serial devices
DOS AND WINDOWS
Full support for DOS and Windows based software
Spezifikation
Chipset: ASIX (Moschip) MCS9865
Compliant with PCI Local Bus Specification, Revision 2.3
PCI IRQ sharing feature reduces IRQ conflicts
Ports: 2, 9-pin, RS-232, DB9, serial ports, Male
UART: 16550
Environmental conditions:
■ Operating temperature: 32 to 122 degrees F (0 to 50 degrees C)
■ Operating humidity: 20% to 80% RH
■ Storage temperature: -4 to 140 degrees F (-20 to 60 degrees C)
■ Storage humidity: 10% to 90% RH
Certifications/Standards: FCC, CE, RoHS
Warranty: 1 years limited
Country of origin: China
Herunterladen
- AVLAB-JJ07-1_Driver_for Windows 8 (32-/64-bit) / 7 (32-/64-bit) / Vista (32-/64-bit) / XP (32-/64-bit) / Server 2003 & 2008 (32-/64-bit) / Server 2008 R2 / 2000 / ME / 98SE / 98 / 95; DOS
- AVLAB-JJ07-1_Driver_for Windows 10 (32-bit) / 8.x (32-bit) / 7 (32-bit) / Vista (32-bit) / XP (32-bit)
- AVLAB-JJ07-1_Driver_for Windows 10 (64-bit) / 8.x (64-bit) / 7 (64-bit) / Vista (64-bit) / XP (64-bit)
- Quick Installation Guide
FAQ
- How do I confirm that Windows detects my expansion card?
- To confirm that Windows detects your expansion card, complete the following: Press the Windows key+R, type devmgmt.msc, and press Enter. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it. For example, a RS-422/485 controller card would be under Ports (COM & LPT)
- How do I confirm that Windows detects my USB device?
- To confirm that Windows detects your USB device, complete the following: Press the Windows key+R, type devmgmt.msc, and press Enter. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it. For example, a USB device would be under Universal Serial Bus controllers.
- How can I make sure my serial port is working in Windows?
- To check whether or not an RS-232 serial port is working, perform an RS-232 loopback test by doing the following: If your serial port is not female, convert it by taking a female/female cable or gender changer and plugging it into the serial port. Take a metal paperclip or wire and cross pins 2 and 3. If you look closely at the female end, the pins should be numbered. Open a telnet session on the COM port number of the device that you are testing. Note: To open a telnet session on the COM port, you need a telnet client like PuTTY or Hyper Terminal. Windows XP comes with Hyper Terminal. When the session is open, anything you type into it you should see. The loopback test fails when you cannot see what you are typing. If the loopback test fails, make sure that the serial cable or gender changer that you are using works and that the adapter is in the correct port.