- Spätestens | AcePro-CE28-1
- AcePro HDMI HDBaseT Extender Over Single Cat5e/6 with RS-232 & IR - 60m, PoC, 4Kx2K 30Hz, EDID management
■ Extends HDMI 1.4 audio and video signal from your HDMI source to a remote HDMI display up to 196ft (60m) at Full HD 1080p, up to 114ft (35m) at UHD 4K (3840x2160) through a single premium quality CAT5e/6 cable Note: The transmission distance will vary depending on cable quality, 100% copper and IEEE-568B wiring standard recommended ■ Delivers crystal clear picture quality with resolution up to 3840x2160@30Hz (YUV 4:4:4 8-bit and YUV 4:2:0 10-bit) ■ Pure unaltered uncompressed 7.1 Ch digital HDMI over CAT cable transmission, DTS-HD Master Audio and Dolby TrueHD high bit rate audio support ■ Bi-directional IR sensors allow you to remotely control the HDMI source device from the remote display side or control the remote display from the source device side
Eigenschaften
Extends HDMI 1.4 audio and video signal
Extends HDMI 1.4 audio and video signal from your HDMI source to a remote HDMI display up to 196ft (60m) at Full HD 1080p, up to 114ft (35m) at UHD 4K (3840x2160) @30Hz through a single premium quality CAT5e/6 cable
Note: The transmission distance will vary depending on cable quality, 100% copper and IEEE-568B wiring standard recommended
Delivers crystal clear picture quality with resolution up to 3840x2160@30Hz (YUV 4:4:4 8-bit and YUV 4:2:0 10-bit)
Pure unaltered uncompressed 7.1ch digital HDMI over CAT cable transmission, DTS-HD Master Audio and Dolby TrueHD high bit rate audio support
Bi-directional IR sensors allow you to remotely control the HDMI source device from the remote display side or control the remote display from the source device side
Spezifikation
Compliant with HDMI 1.4
Supports HDCP and EDID pass through, Auto Skew Equalization, CEC, Deep Color and full 3D
Supports 3840x2160@30Hz 4:4:4 8bit
Video bandwidth up to 10.2Gbps (340MHz per channel)
Video latency: <20µs
Audio support: Surround sound (up to 7.1ch), stereo digital, DTS-HD Master Audio and Dolby TrueHD high bit rate
Bi-directional IR pass-through supports full frequency IR signal from 20KHz to 60KHz
Full Duplex RS-232 control up to 115,200 bps through connector
Resolution: 480p / 720p / 1080i / 1080p / 3840x2160@30Hz (YUV444 8bit / YUV420 10bit)
Supports PoC (Power over Cable) technology which allows both the transmitter and receiver units to be powered through one power adapter
connected to either unit
ESD protection: ±15kV Air & ±8kV Contact
Aluminum housing with wall mount design
Transmission protocol: HDBaseT technology
Note: Does not support connecting to Router or Switch
Transmission Distance:
■ 1080p@60Hz: up to 196ft. (60 meters)
■ 3840x2160@30Hz/60Hz: up to 114ft. (35 meters)
Note: The transmission distance will vary depending on cable quality, 100% copper and IEEE-568B wiring standard recommended
Product:
Transmitting unit (TX):
■ Dimensions: 4.06" (L) x 0.83" (H) x 2.87" (W)
■ Weight: 0.24lbs
Connectors:
■ 1x 19-pin HDMI, Type A, Female, Input
■ 1x 8-pin, RJ45, output
■ 1x 3.5mm jack, IR In
■ 1x 3.5mm jack, IR Out
■ 1x Power LED indicator
■ 1x 3-Pin, RS-232, Phoenix connector
■ 1x Power jack
Receiving unit (RX):
■ Dimensions: 4.06" (L) x 0.83" (H) x 2.87" (W)
■ Weight: 0.26lbs
Connectors:
■ 1x 19-pin HDMI, Type A, Female, Output
■ 1x 8-pin, RJ45, Input
■ 1x 3.5mm jack, IR In
■ 1x 3.5mm jack, IR Out
■ 1x Power LED indicator
■ 1x 3-Pin, RS-232, Phoenix connector
■ 1x Power jack
Power adapter:
■ Input: AC 100-240V / 50-60Hz
■ Output: DC 12V/2A
■ UL Listed: E163743 / Class VI
Environmental conditions:
■ Operating temperature: 32 to 104 degrees F
■ Storage temperature: 14 to 158 degrees F
■ Relative humidity: 5% to 90% RH (non-condensing)
Certifications/Standards: FCC, CE, RoHS
Warranty: 1 years limited
Country of origin: Taiwan