■ One handed operation to quickly mount and remove devices between 2.2" and 3.3" wide from the Mount Holder. Help driver’s to stay focused on the road while driving for safety. Mount Holder Charges up to 10W (depending on your device battery). Suitable for iPhone Xs Max/Xs/X/8 Plus/8 Samsung Galaxy S6/S7/S8/S9 Note 8/9 and other Qi-enabled devices.
Note: charges through most phone cases. When in doubt remove your phone case for charging.
■ Suitable for Uber, Lyft, Curb and Via and other Ride-Sharing drivers providing services. A great conversation starter and reduces hassle so drivers can attend to passengers.
■ Allows the driver to adjust Mounting Arms to avoid blocking the line of sight when driving and fine tune viewing angles by using the 360 degrees rotation pivot.
■ The Mount Holder comes with an interchangeable Air Vent Mount and a Suction Mount, which can all be stored away easily in the passenger side’s leg compartment when not in use.
■ Adds AC power accessibility to your desktop and reduces mess. Helps reduce inconvenient plugging and unplugging postures. Note: Please hold the power strip while plugging and unplugging for tight fitting plugs.
■ Avoid having to bend down or crawl to plug and unplug from the wall or floor to reduce back pain. Health orientated design to be convenient for people with Back Pain and Spine Conditions.
■ Accommodates most power strips that are 1.6" to 2.4" wide. Anti-Scratch Silicone Pads on the Clamp helps to keep your surface scratch free and pristine.
■ Setup only takes a few minutes which will make a big difference to the organization of your plugs enhancing your environment. Integrated Cable Management Feature helps keep cables neat and tidy.
■ Raise your laptop height to anywhere between 0.79 inches to 4.09 inches maximum. Helps with posture for work, reading, media consumption, and more. Greatly increase comfort and convenience in short monitor eye-level situations.
■ Supports MacBook/Notebook/Laptop up to 17 inches. Suitable for MacBook, Windows Notebook/Ultrabook, iPad and Tablet. Anti-Slip Silicone Pads helps effectively protect your laptop from sliding and scratches. The stand also allows cables to be neatly routed to the back to reduce clutter and interference.
■ Lab tested and passes 15,000-Cycle Motion Test for durability and longevity with guaranteed supported weights up to 22lbs. Foldable Design helps to save space, keeping the environment clean and tidy when not in use.
■ Fully foldable into a compact size similar to an A4 sheet of paper for easy storage in your bag to take to the coffee shop, office or other places you need to use your MacBook or Laptop. The stand also serves as a portable laptop table for greater comfort in bed, on a sofa or couch.
■ Optimize your desk space by deciding how you want to fold the tuck away arms. All configurations will maintain the same height.
■ Easily store both Keyboard and Tablet under the monitor stand with quick access for when you need it.
■ Retractable storage drawer and mobile device stand allows for increased productivity without interfering with your monitor sight.
■ Integrated metal reinforcements within the monitor stand allows heavier monitors such as larger iMac to be stably placed on it.
■ Broad compatibility - Ideal for 13" to 32" monitors that weight up to 19.8 lbs
■ Rotatable VESA plate patterns supports monitor orientation
■ HEAVY-DUTY "C"-CLAMP compatible with desk and grommet mount fits through surface hole
■ Space-saving - fold-able arm frees up additional space and extends up to 22
■ Rotatable VESA plate patterns supports monitor orientation
■ Broad compatibility - Ideal for 13" to 32" monitors that weight up to 19.8 lbs
■ HEAVY-DUTY "C"-CLAMP compatible with desk and GROMMET MOUNT fits through surface hole
■ Space-saving - fold-able arm frees up additional space and extends up to 22"
■ Premium quality durable gas spring assisted full-motion desktop mount provides smooth, precise and effortless viewing height adjustment
■ Supports monitors from 13" to 32” and up to 15.4 lbs. (7 Kgs) each
■ 3-stage independently articulating design allow adjusting for the best viewing angle easily with little effort
■ Rotatable VESA plate supports portrait or landscape monitor orientation
■ Compatible with VESA mounting patterns 75 x 75 and 100 x 100 mm
■ High quality gas spring, give the best ergonomic experience possible
■ The dual arms work on a single joint to deliver an efficient side-by-side monitor layout
■ Easily and quickly installs onto most of desks or tables
■ Compatible with 17" to 32" flat and curved monitors
■ Weigh up to 17.6 lbs (8 kgs) each
■ Detachable and rotatable VESA plate
■ Supports 35° tilt angle (upward/downward) and 180° pane angle (left/right)
■ Creating a clean, sleek look
■ High quality gas spring, give the best ergonomic experience possible
■ The dual arms work on a single joint to deliver an efficient side-by-side monitor layout
■ Easily and quickly installs onto most of desks or tables
■ Compatible with 17" to 32" flat and curved monitors
■ Weigh up to 17.6 lbs (8 kgs) each
■ Detachable and rotatable VESA plate
■ Supports 35° tilt angle (upward/downward) and 180° pane angle (left/right)
■ Creating a clean, sleek look
■ High quality gas spring, give the best ergonomic experience possible
■ The dual arms work on two independent joints
■ Easily and quickly installs onto most of desks or tables
■ Multi-functional way possible – side-by-side or top-and-bottom
■ Compatible with 17" to 32" flat and curved monitors
■ Weigh up to 17.6 lbs (8 kgs) each
■ Detachable and rotatable VESA plate
■ Supports 35° tilt angle (upward/downward) and 180° pane angle (left/right)
■ Creating a clean, sleek look after setup
■ High quality gas spring assisted full-motion wall mount provides smooth, precise and effortless viewing height adjustment up to 11.02 inches
■ Compatible with VESA mounting patterns 75 x 75 and 100 x 100 mm
■ Compatible with 17" to 32" fat and curved monitors that weigh up to 17.6 lbs (8 kgs)
■ Detachable and rotatable VESA plate supports portrait or landscape monitor orientation
■ Supports 35° tilt angle (upward/downward) and 180° pane angle (left/right)
■ The included cable management clip conceals cables from sight, creating a clean, sleek look after setup
■ High quality gas spring assisted full-motion wall mount provides smooth, precise and effortless viewing height adjustment up to 11.02 inches
■ Detachable and rotatable VESA plate supports portrait or landscape monitor orientation
■ The arm can be extended up to 16.61 inches, great for areas with limited wall space
■ Compatible with 17" to 32" fat and curved monitors that weigh up to 17.6 lbs (8 kgs)
■ Compatible with VESA mounting patterns 75 x 75 and 100 x 100 mm
■ Supports 35° tilt angle (upward/downward) and 180° pane angle (left/right)
■ The included cable management clips conceal cables from sight, creating a clean, sleek look after setup
■ High quality gas spring assisted full-motion wall mount provides smooth, precise and effortless viewing height adjustment up to 11.02 inches
■ Detachable and rotatable VESA plate supports portrait or landscape monitor orientation
■ The dual arm can be extended up to 16.61 inches, great for areas with limited wall space
■ Compatible with 17" to 32" fat and curved monitors that weigh up to 17.6 lbs (8 kgs) each
■ Compatible with VESA mounting patterns 75 x 75 and 100 x 100 mm
■ Supports 35° tilt angle (upward/downward) and 180° pane angle (left/right)
■ The included cable management clips conceal cables from sight, creating a clean, sleek look after setup
■ Raises and lowers your monitor along the arm to improve workstation ergonomics, adjustable height from
10"-18" max (from the desktop)
■ Compatible with 17" to 32" fat and curved monitors that weigh up to 17.6 lbs (8 kgs)
■ Detachable and rotatable VESA plate supports portrait or landscape monitor orientation, offers 10° tilt
(upward/downward) and 10° swivel (left/right)
■ Compatible with VESA mounting patterns 75 x 75 and 100 x 100 mm
■ Both desk clamp and grommet mount bases are included, easily and quickly installs onto most desks or tables.
■ Max desk thickness of 0.98 inches
■ Built-in slots for holding tools and concealing cables to keep your work area clutter-free and sleek
■ Raises and lowers your monitors along the arm to improve workstation ergonomics, adjustable height from 9.4"-18.5" max (from the desktop)
■ Compatible with 17" to 27" fat and curved monitors that weigh up to 15.4 lbs (7 kgs) each
■ Detachable and rotatable VESA plate supports portrait or landscape monitor orientation, offers 10° tilt (upward/downward) and 10° swivel (left/right)
■ Compatible with VESA mounting patterns 75 x 75 and 100 x 100 mm
■ Both desk clamp and grommet mount bases are included, easily and quickly installs onto most desks or tables. Max desk thickness of 0.98 inches
■ Built-in slots for holding tools and concealing cables to keep your work area clutter-free and sleek
■ 7-in-1 Design: 1 x Apple Watch Charging Stand + 6 x Smartphones, tablets or USB charging devices
■ Eco-Friendly and Space Saving design: Made of 100% natural bamboo wood material with durable construction design
■ Functional smart cable management design to keep charging cable tidy and organized
■ Raises laptop screen to eye-level for a comfortable reading and typing experience
■ Soft mesh cushion base provides padded support, making it also enjoyable for lap use
■ Accommodates laptop system up to 17" and supports tri-level height adjustment
■ Integrated USB powered cooling fan keeps your laptop from overheating
■ Included rubber risers increase laptop airflow for better heat dissipation
■ Retractable stands so you can easily setup the height of the cooling pad. Or can be used to hold your tablet/ iPad as a tablet stand
■ High quality gas spring, give the best ergonomic experience possible
■ The dual arms work on two independent joints
■ Easily and quickly installs onto most of desks or tables
■ Multi-functional way possible – side-by-side or top-and-bottom
■ Compatible with 17" to 32" flat and curved monitors
■ Weigh up to 17.6 lbs (8 kgs) each
■ Detachable and rotatable VESA plate
■ Supports 35° tilt angle (upward/downward) and 180° pane angle (left/right)
■ Creating a clean, sleek look after setup
■ Raises your laptop screen height to best ergonomic viewing position and release wrist pressure during typing
■ 4 strips opening design with better air flow for heat dissipation
■ Anti-slip silicone pads offer additional stability
■ 12 and 23 angle degree optional (height from 1.97" to 3.62")
■ Work great with Macbook Air/Macbook Pro and other 12-17” laptop
■ Design to fit any VESA monitor mount with 75 x 75 and 100 x 100mm mounting holes
■ Supports most 13-27” monitors with thickness from 1” to 1.5” and up to 17.6 lbs (8kgs)
■ Adjustable security arms can be placed in different position to hold up to 27” monitors securely
■ Includes all required screws and other hardware for easy assembly
■ Raises a monitor, laptop or all-in-one computer to best ergonomic viewing position
■ Maximizes desktop space and create underneath space below to store and organize keyboard, mouse or other desktop items
■ Premium aluminum alloy unibody construction provides sleek clean and elegant appearance
■ Works great with computer monitor, laptop and iMac 21 & 27
