- AVLAB-SC01-1
- AVLAB Dual Port eSATA PCIe Card, 6Gbps, External Serial ATA, Dual Profile Barcket
■ Adds 2 external SATA (eSATA) 6Gb/s channels to your PCIe system ■ Supports port multiplier - up to 5 hard disks (max) on each eSATA port and up to 7 hard disks amongst the connected port multipliers. Note: The included Asmedia driver must be installed for port multiplier operation ■ Installs in standard height or low profile chassis with included brackets ■ Works with the latest 6Gb/s SATA HDDs and backwards compatible with 3Gb/s and 1.5Gb/s HDDs
產品詳情
EXPANSION
Adds 2 external SATA (eSATA) 6Gb/s channels to your PCIe system
MULTIPLE HARD DISK SUPPORT
Supports port multiplier - up to 5 hard disks (max) on each eSATA port and up to 7 hard disks amongst the connected port multipliers. Note: The included Asmedia driver must be installed for port multiplier operation
FULL HEIGHT AND LOW PROFILE SUPPORT
Installs in full height and low profile chassis with included brackets
BACKWARDS COMPATIBLE
Works with the latest 6Gb/s SATA HDDs and backwards compatible with 3Gb/s and 1.5Gb/s HDDs
產品規格
Chipset: Asmedia ASM1061
Compliant with Serial ATA specification, Revision 3.0
Compliant with PCI Express Base specification, Revision 2.0
Supports ATA/ATAPI-7 specification
Supports port multiplier on each port:
■ Supports up to 5 hard disks (max) on each port multiplier and up to 7 hard disks (combined) amongst the connected port multipliers
■ The included Asmedia driver must be installed for port multiplier operation
Supports Native Command Queuing (NCQ)
Supports 6Gb/s data transfer rate (max)
Supports 48-bit LBA and verified to work with up to 4TB drives
Bus connector: x1 PCI Express
Ports: 2 x external (eSATA) SATA 6Gb/s
Product dimesions: 3.50" (W) x 4.75" (H) x 0.75" (D)
Product weight: 0.15 lbs
Environmental conditions:
■ Operating temperature: 32 to 140 degrees F (0 to 50 degrees C)
■ Operating humidity: 10% to 90% RH
■ Storage temperature: -4 to 140 degrees F (-20 to 60 degrees C)
■ Storage humidity: 5% to 95% RH
Certifications/Standards: FCC, CE, RoHS
Warranty: 1 years limited
Country of origin: China
FAQ
- How do I confirm that Windows detects my expansion card?
- To confirm that Windows detects your expansion card, complete the following: Press the Windows key+R, type devmgmt.msc, and press Enter. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it. For example, a RS-422/485 controller card would be under Ports (COM & LPT)
- How do I confirm that Windows detects my USB device?
- To confirm that Windows detects your USB device, complete the following: Press the Windows key+R, type devmgmt.msc, and press Enter. In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it. For example, a USB device would be under Universal Serial Bus controllers.
- How can I make sure my serial port is working in Windows?
- To check whether or not an RS-232 serial port is working, perform an RS-232 loopback test by doing the following: If your serial port is not female, convert it by taking a female/female cable or gender changer and plugging it into the serial port. Take a metal paperclip or wire and cross pins 2 and 3. If you look closely at the female end, the pins should be numbered. Open a telnet session on the COM port number of the device that you are testing. Note: To open a telnet session on the COM port, you need a telnet client like PuTTY or Hyper Terminal. Windows XP comes with Hyper Terminal. When the session is open, anything you type into it you should see. The loopback test fails when you cannot see what you are typing. If the loopback test fails, make sure that the serial cable or gender changer that you are using works and that the adapter is in the correct port.