• AVLAB-US19-1
  • AVLAB SuperSpeed USB 3.0 Gigabit LAN Adapter - Black

■ Compact and light weight design makes it a perfect LAN accessory while on-the-go, provides instant wired Ethernet connection
■ Adds a Gigabit LAN port (RJ45) to your desktop, laptop or tablet computer through USB 3.0 connection
■ Supports advanced link down power saving when Ethernet cable is unplugged
■ Supports Wake-on-LAN
■ High performance packet transfer rate
■ Supports MDI/MDIX auto-crossover, Wake-on-LAN, IEEE 802.3az (Energy Efficient Ethernet) and Jumbo Frame
■ Built-in power and data diagnostic LEDs
■ Supports full duplex with flow control and half duplex with back pressure operation
■ Supports crossover detection and auto-correction

  • $0 $0

Highlights

Compact and light weight design
makes it a perfect LAN accessory while on-the-go, provides instant wired Ethernet connection

Adds a Gigabit LAN port (RJ45)
to your desktop, laptop or tablet computer through USB 3.0 connection

Supports advanced link
down power saving when Ethernet cable is unplugged

Supports Wake-on-LAN

High performance packet transfer rate

Supports MDI/MDIX auto-crossover 
Wake-on-LAN, IEEE 802.3az (Energy Efficient Ethernet) and Jumbo Frame

Built-in power and data diagnostic LEDs

Supports full duplex
with flow control and half duplex with back pressure operation

Supports crossover detection and auto-correction

Specification

Chipset: Realtek RTL8153

 

Compliant with Universal Serial Bus 3.0 Specification and backward compatible with USB 2.0

 

Supports full duplex operation with IEEE 802.3x flow control and half duplex operation with back-pressure flow control

 

Compatible with IEEE 802.3, 802.3u

 

Supports IEEE 802.3az (Energy Efficient Ethernet)

 

Supports IEEE 802.1Q VLAN tagging

 

Supports IPv4/IPv6 packet Checksum Offload Engine to reduce CPU loading

 

Supports IEEE 802.1P Layer 2 Priority Encoding

 

Product:

■ Overall length (including embedded USB cable): 7.48" (190mm)

■ Dimensions (housing): 2.56" (W) x 1.14" (H) x 0.79" (D)

■ Weight: 0.07 lbs

■ Color: Black

■ Housing material: Plastic

 

Connectors:

■ 1x 9-pin, USB 3.0, A-Type, Male

■ 1x 8-pin, RJ45 with 2 LED indicators, Network, Female

 

Environmental conditions:

■ Operating temperature: 32 to 122 degrees F

■ Storage temperature: 14 to 140 degrees F

■ Relative humidity: 5% to 85% RH (non-condensing)

 

Certifications/Standards: FCC, CE, RoHS

 

Warranty: 1 year limited

 

Country of origin: China

FAQ

  • Q: What is USB Type-C?
  • USB-C is a type of USB connector that is capable of supporting the following:
    ■ Data transfer speeds up to 10Gbps, if you use USB 3.1.
    ■ Bi-directional power delivery up to 100W, if both the USB host connection and the device support it.
    ■ Alternate modes, which deliver different types of data at different speeds. For example, DisplayPort Alternate Mode (DP Alt Mode).

    If using Thunderbolt 3 over USB-C, the connection is capable of additional features. For example, Thunderbolt 3 is capable of 40Gbps of total bandwidth.

    Not all USB-C ports or devices are capable of supporting all of the features listed above, or all of the features at the maximum capabilities. If you require a specific USB-C feature, your USB host connection, cables, and device must all support the feature that you require. For more information about whether your components support specific USB-C features, refer to the information provided by the manufacturers.
  • Q: How do I confirm that Windows detects my USB device?
  • To confirm that Windows detects your USB device, complete the following:
    Press the Windows key+R, type devmgmt.msc, and press Enter.

    In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.
    For example, a USB device would be under Universal Serial Bus controllers.
  • Q: How do I confirm that Windows detects my expansion device?
  • To confirm that Windows detects your expansion card, complete the following:
    Press the Windows key+R, type devmgmt.msc, and press Enter.
    In Device Manager, under the appropriate heading, confirm that your expansion card is listed and that there isn't an exclamation mark next to it.
    For example, a USB device would be under Universal Serial Bus controllers.

SUBSCRIBE TO OUR EXCLUSIVE OFFERS