• new | AcePro-CEA2-1
  • AcePro HDMI 2.0 4K60Hz Over IP Extender / Matrix with IR - Kit

■ Transmits 4K HDMI signals with stereo audio to a remote display over Cat5e/6/7 cabling up to 120 meters
Note: A good quality Cat5e/6/7 cable is essential in delivering quality content, Cat6/6a/7 is recommended over Cat5e
■ Works as a scalable TX/RX Matrix over dedicated IP network, allows up to 255 total units, limited to 100 transmitters. Additional transmitter units (part # CE-H25B11-S1) and receiver units (part # CE-H25C11-S1) sold separately
Note: Dedicated unmanaged IGMP Gigabit Switch is recommended for best performance and reliability
■ Delivers up to [email protected] video resolution to deliver stunning and crystal clear images
■ IR pass back function to control the source device from RX location
■ Computer control software to select and switch between source devices (Matrix only)
■ HDbitT protocol with H.264 compression over IP delivers superior performance and reliability

  • $0 $0

Highlights

Transmits 4K HDMI signals with stereo audio
To a remote display over Cat5e/6/7 cabling up to 120 meters
Note:A good quality Cat5e/6/7 cable is essential in delivering quality content, Cat6/6a/7 is recommended over Cat5e

Works as a scalable TX/RX Matrix over dedicated IP network
Allows up to 255 total units, limited to 100 transmitters. Additional transmitter units (part # CE-H25B11-S1) and receiver units (part # CE-H25C11-S1) sold separately
Note:Dedicated unmanaged IGMP Gigabit Switch is recommended for best performance and reliability

Delivers up to [email protected] video resolution
To deliver stunning and crystal clear images

IR pass back function
To control the source device from RX location

Computer control software to select and switch between source devices (Matrix only)

HDbitT protocol with H.264 compression over IP
Delivers superior performance and reliability

Specification

Transmission Protocol:HDbitT, V1.3x-c (H.264 compression)

 

Compliant with HDMI 2.0 and HDCP 2.2

 

HDMI resolution:Up to [email protected]

 

Maximum transfer rate:18Gbps

 

HDMI cable length:Up to 5m, 26AWG (Input & Output)

 

Supports 2-Ch PCM stereo audio

 

Connection modes:
■ One-to-One: Extender, 1 TX to 1 RX
■ One-to-Many: IP Splitter using IGMP Gigabit Switch
■ Many-to-Many: IP Matrix using IGMP Gigabit Switch

 

Transmission distance:
■ One-to-One: 120 meters
■ One-to-Many / Many-to-Many: 100 meters

Supports full frequency IR signal from 20KHz to 60KHz

 

Latency:< 200ms

 

Protection Level:
■ A Contact discharge level 3
■ B Air discharge level 3
■ C Standard: IEC61000-4-2

Housing material:Metal Housing

 

Housing color:Black

 

Product:

Transmitting unit (TX):
■ Dimensions: 5.28" (L) x 1.18" (H) x 4.33" (W)
■ Weight: 0.72 lbs
■ Connectors:
1x 19-pin HDMI, Type-A, Female, Input
1x 3.5mm jack, IR Blaster
1x 8-pin RJ45, HDbitT, Output
1x Power jack
1x Switch button (for ID)
1x Reset button

 

Receiving unit (RX):
■ Dimensions: 5.28" (L) x 1.18" (H) x 4.33" (W)
■ Weight: 0.72 lbs
■ Connectors:
1x 19-pin HDMI, Type-A, Female, Output
1x 3.5mm jack, IR Receiver
1x 8-pin RJ45, HDbitT, Input
1x Power jack
2x Switch button (For RX ID & TX ID connected)
1x Reset button

 

Power adapter:
■ Input: 100-240V / 50-60Hz
■ Output: DC 5V/3A
■ UL Listed: E335801 / Class VI

 

Environmental conditions:
■ Operating temperature: 32 to 122 degrees F
■ Storage temperature: 14 to 158 degrees F
■ Relative humidity: 0 to 90% RH (non-condensing)

 

Certifications/Standards:FCC, CE, RoHS

 

Warranty:1 years limited

 

Country of origin:China

 

Requirements
■ 100% copper wire Cat5e/6/7 cable using T568B wiring standard
Cat6/6a/7 is recommended over Cat5e for optimal performance and reliability

 

Package Contents
■ HDMI 2.0 4K60Hz Over IP Extender / Matrix with IR - Kit (1 Transmitter + 1 Receiver)
■ Power adapter (2pcs)
■ IR Blaster cable & IR Receiver cable
■ Mounting ear (4pcs) and Screw (8pcs)
■ Remote Control
■ Insert card
■ User Manual

 

Download

FAQ

SUBSCRIBE TO OUR EXCLUSIVE OFFERS