- new | AcePro-EX55-1
- HDMI Over IP Extender with IR - Receive
Highlights
- Features
- Extend and control HDMI signals with stereo audio up to 394ft (120m) to the remote display with HDbitT over IP technology and supports multi-casting connection for optimal (the best) application
- What is HDbitT?
- HDbitT is a new generation audio/video digital connection transmission protocol solution. Provides stable performance, long-distance transmission, and high-definition signal
- Further Distance
- This HDMI over IP Extender with IR-Kit designed for transmission/security, HDMI signals up to 394ft (120m) through HDbitT protocol and Gigabit Ethernet switch to a remote HDMI display
- Highly Scalable
- Works as a scalable TX/RX matrix over the dedicated IP network and allows up to 256 total units, limited to 100 units per transmitter, and extends/splits HDMI signals to multiple displays. The additional transmitter unit and receiver unit is sold separately *Note: IGMP Gigabit Switch is recommended for best performance and reliability
- Multicasting connection is transmitting data from multiple HDMI sources over an IGMP network switch to the intended receivers (RX) via Transmitters (TXs)
- Full HD Resolution
- Supports high-definition video resolution up to1080p (1920x1080) @60Hz, HDCP 1.4 to deliver a clear picture quality and local HDMI loop-out allows you to monitor the extended display from the source location
- IR Extension
- IR pass-through feature allows remote control of the HDMI source device and playback function at the remote display
- High Performance
- Offers a true 10.2Gbps video bandwidth and supports stereo audio
- RS-232 Control
- Bi-direction function and pass-through connection to control RS-232 enable devices in either direction
- Flexible Control
- Easily switch and setup remote displays via front panel LED digital channel buttons or attached remote control, and video control software
- Video control software: to select and switch between source devices
- Multiple Connectivity Ports
- Comes with one HDMI video output port, one RJ45 network port, one RS-232 port, one 3.5mm IR receiver port, Channel switch buttons, Connect TX channel buttons, one reset button, one DC power jack (5V/2A)
- H.264 Compression
- HDMI signal is encoded into H.264 to be sent through the network router or switch then decoded before arriving at the specified display. Ensures enough bandwidth is available to pass multiple HDMI signals over one network
- Maximum Compatibility
- Supports Plug-n-play. No driver installation required The reset button allows displays to be re-detected if no displays are detected
- Metal Housing Design
- Protects the inside PCBA, also enhance the heat dissipation for better performance. Military-grade component for long service life
Specification
- Video
- HDMI: 1x loop-out
- Resolution:1080p (1920x1080) / 1080i / 720p / 480p @60Hz, HDCP 1.4
- Transport protocol
- HDbitT protocol: Audio/video digital connection transmission protocol
- Audio
- Stereo audio from HDMI, support 192Kbps bit rate
- IR pass-through
- Allows remote control of the HDMI source device and playback function at the remote display
- Full frequency: 20KHz to 60KHz
- RS-232 control
- Bi-direction function and pass-through connection to control RS-232 enables devices in either direction
- Power
- Power adapter
- Input: 100-240V/50-60Hz, Output: DC 5V/2A
- UL listed: E335801/Level: VI
- Environmental conditions
- Operating temperature: 32 to 122 degrees F
- Storage temperature: 14 to 144 degrees F
- Relative humidity: 0% to 90% RH (non-condensing)
- Product Info
- Receiver unit (RX)
- Dimensions: 5.27” (L) x 0.94” (H) x 3.30" (W)
- Weight: 0.60lbs
- Color: black
- Housing material: metal
- Unit package
- Dimensions:7.83” (L) x 3.15” (H) x 5.87" (W)
- Weight:1.37 lbs
- Certifications/Standards
- FCC, CE, RoHS, REACH
- Warranty: 2 years limited
- Country of origin: China